Centimeter-scale DTS temperature and fire monitoring for large oil and chemical tanks

Project background: from isolated alarms to continuous risk assessment

Centimeter-scale DTS temperature and fire monitoring for large oil and chemical tanks addresses the long-term safety and condition management of external- and internal-floating-roof oil tanks, spherical tanks, molten-salt or chemical tanks, shell seals, tank bottoms and tank-farm cables. Such assets commonly span multiple spaces, process sections or asset identifiers; risks can move along routes, equipment boundaries and structural weaknesses rather than appearing at predetermined measuring points. Key concerns include localized seal fires, abnormal shell temperature, insulation defects, fluid leaks and rapid changes caused by lightning or external heat. Point sensors, manual inspections and video provide local evidence but may not capture the complete development of an anomaly from onset to response.

The solution uses centimeter-scale DTS, standard DTS and corrosion-resistant temperature-sensing cable, placing sensing fiber along the paths that need observation to create continuous, localized and replayable records. Its objective is to create high-density temperature paths around seals and critical tank elevations, locate small hotspots and observe their spread, rather than add isolated equipment. Start design with an asset-risk inventory and verifiable monitoring objectives, then specify range, spatial resolution, sampling, sensing-cable construction, software interfaces and alarms.

Risk progression and monitoring boundaries

For external- and internal-floating-roof oil tanks, spherical tanks, molten-salt or chemical tanks, shell seals, tank bottoms and tank-farm cables, distinguish initiating factors, early signs, developing conditions and consequences. Risks including localized seal fires, abnormal shell temperature, insulation defects, fluid leaks and rapid changes caused by lightning or external heat may occur independently or arise from combined load, environmental, construction and maintenance effects. Capture measurable changes in temperature, acoustics, vibration, strain or local condition and associate them with specific assets and distances.

Sensing principles and technology selection

A DTS interrogator launches short laser pulses into sensing fiber and calculates temperature along the fiber from returned Raman backscatter. Engineering value lies in continuous temperature profiles, accurate distance to anomalies, heating rates and heat-propagation direction rather than isolated readings. The sensing cable acts as both measurement medium and a long temperature array, without closely spaced power supplies along its route. This suits strong electromagnetic fields, damp or dusty locations, hazardous areas and sites with difficult maintenance access, subject to the required equipment and installation approvals.

The recommended combination is centimeter-scale DTS, standard DTS and corrosion-resistant temperature-sensing cable. Check monitoring distance, spatial resolution, localization accuracy, channel count, dynamic range, sampling cycle, operating temperature and communications together. Specifications should support the objective to create high-density temperature paths around seals and critical tank elevations, locate small hotspots and observe their spread, rather than be compared individually. For long routes, prioritize signal-to-noise ratio, reliable localization and far-end stability; for localized high-risk areas, assess coupling, effective sensing length and response time.

System architecture: sensing, interrogation, software and response

The system comprises sensing cable or fiber sensors, splicing and protection units, interrogation equipment for centimeter-scale DTS, standard DTS and corrosion-resistant temperature-sensing cable, edge processing, application software and supervisory interfaces. Returned signals undergo quality checks, distance calibration and parameter calculation before mapping to asset records. Outputs include live curves, time-space plots, event lists, risk zones, historical trends and reports, rather than an unexplained waveform.

Integrate tank-farm fire systems, foam suppression, video and storage/transport management, with tank-number and angular-position mapping. Define the data dictionary, time synchronization, alarm acknowledgment, offline buffering and recovery upload. For important projects, use tiered retention of raw or feature data to support incident reviews, algorithm improvement and threshold changes.

Sensing cable and field installation

Recommended installation: use circumferential, spiral or layered routes according to tank structure; provide centimeter-scale effective sensing at critical seals, balancing thermal coupling and maintenance access. Installation quality directly affects results; the same interrogator can respond differently with different mounting, jacket materials and coupling. Design documents should identify start/end distances, slack loops, splice boxes, zone boundaries, fastening intervals, bend radius, pulling tension and protection.

Data analysis and graded alarms

The alarm model combines absolute temperature, rate of rise, differences between adjacent sections, differences between similar assets and duration. Establish normal baselines for season, load, ventilation and process state before detecting deviations. Centimeter-scale DTS suits small heat sources and dense localization, while standard and long-range DTS suit continuous routes. Select by asset size, cable coupling and permitted response time, rather than ranking systems solely by spatial resolution.

Initial application criteria: set zonal thresholds, rate-of-rise limits and circumferential temperature-difference criteria against sunlight, stored-fluid temperature and operating phase. Use advisory, early-warning, alarm and emergency levels, each with defined confirmation times, verification and actions. Calibrate thresholds against actual conditions during trial operation and record every revision, reason and effective date. Display position, asset name, measured value, baseline deviation, duration and supporting evidence together.

Commissioning, acceptance and performance verification

Acceptance should use zoned heating, controlled movement of heat sources and repeated tests under different operating conditions to verify localization error, response time, temperature repeatability and alarm interlocks. Heating a short length next to the interrogator alone is insufficient; sample the far end, joints, bends and positions with unfavorable heat transfer.

Maintenance and sustained effectiveness

Maintenance assessment should cover valid-alarm rates, confirmation time, false-alarm causes, missed-event reviews, closed work orders and detected trends, not just equipment uptime. Continued labeling of real events can improve recognition models and sustain practical performance after commissioning.

Integration with existing systems

Integrate tank-farm fire systems, foam suppression, video and storage/transport management, with tank-number and angular-position mapping. Let the fiber platform handle interrogation, curve analysis and original evidence, while the supervisory system manages consolidated displays, duty workflows and work orders. Depending on the project, interfaces may use Modbus TCP, OPC UA, IEC protocols, REST APIs, message queues or dry contacts. Avoid transferring only an unexplained aggregate alarm.

Every alarm on a map, plan or process diagram should link back to original curves and historical trends. Feed dispositions from supervisory systems back into event records, closing the loop between monitoring, confirmation, response, review and threshold improvement.

Benefits, operating conditions and technical boundaries

The solution replaces sampled inspections of external- and internal-floating-roof oil tanks, spherical tanks, molten-salt or chemical tanks, shell seals, tank bottoms and tank-farm cables with continuous observation, retaining traceable early indications of localized seal fires, abnormal shell temperature, insulation defects, fluid leaks and rapid changes caused by lightning or external heat. Passive fiber, electromagnetic immunity and multiple sensing locations on one fiber can reduce distributed power and maintenance requirements on long routes, at unattended sites or in hazardous environments. Locations and trends help teams narrow inspections, plan condition-based maintenance and prioritize risk.

Equipment selection and detailed design

Begin with five questions: which parts of external- and internal-floating-roof oil tanks, spherical tanks, molten-salt or chemical tanks, shell seals, tank bottoms and tank-farm cables require protection; which indications of localized seal fires, abnormal shell temperature, insulation defects, fluid leaks and rapid changes caused by lightning or external heat must be detected; what localization, response and sampling performance is needed; what routing, power, communications and cabinet facilities are available; and who confirms alarms and owns the response workflow?

Then specify the combination of centimeter-scale DTS, standard DTS and corrosion-resistant temperature-sensing cable, cable construction, single- or double-ended optical paths, channel redundancy, software licensing and interfaces. For phased projects, reserve fiber, rack space, network addresses and platform capacity. For long-distance or multisite projects, evaluate centralized interrogation, distributed edge nodes and remote maintenance together.

Application-specific validation and limitations

Convert circumferential fiber positions into tank numbers, elevations and azimuths. With multiple turns, take particular care not to assign fiber distance to the wrong elevation. Floating-roof movement, seals and maintenance openings affect mounting; routing must remain compatible with tank operation and access.

Sunlight can create persistent differences around a shell. Distinguish sunlit and shaded sides and interpret changes alongside fluid temperature and level. For small seal-area hotspots, verify effective sensing length and thermal coupling rather than substituting sampling interval for field response tests. Retain baselines after thunderstorms, loading/unloading and maintenance for alarm review.

Installation, optical-path calibration and acceptance checklist

Related products and technical resources

Explore the product categories below according to distance, spatial resolution, channels, response and site conditions. Published specifications support preliminary selection; final configuration must account for optical loss, installation and acceptance objectives.